This text is a continuation to my Chia plotting & farming information. In the event you haven’t already, take a look at half 2 the place I discuss one of the best {hardware} for plotting, and subsequent half 3 the place I discuss one of the best farming {hardware}.
Now that your Chia plotting rig is prepared, it’s time to arrange the plotter software program and begin incomes your first Chia cash. When you’ve got checked my earlier guides, you’ll have an thought on what sort of outcomes to count on.
Obtain Chia Pockets, Setup & Backup
Very first thing first let’s obtain & set up Chia GUI from official web site right here: https://www.chia.internet/obtain/ (at all times double verify if you happen to obtain from official sources), be sure you backup & save seed phrase in a protected location like:
One other advice to keep protected is to farm to a chilly pockets straight. Create your plots and farm with one pockets/seed phrase however ship the rewards to a distinct one (chilly pockets) by altering your farming rewards goal deal with in Chia GUI Pockets, right here is how:
Open Chia GUI and go to “Farm” tab
Then click on on the three dots from high proper
Go to “Handle Farming Rewards“
There change each deal with with the one the place you need to obtain the rewards
Executed 🙂
Finest Chia Plotter Software program
Similar to most customers, I first began plotting with the at the moment well-liked SWAR plotter, plotting 8 in parallel with my present configuration from right here. Later, I moved on to PSChiaPlotter. Whereas PSChiaPlotter is a superb piece of software program, I quickly found madMAx43v3r plotter, and I’m now at the moment utilizing it as a result of it provides one of the best outcomes by far. Right here’s why.
The MadMAx43v3r Chia Plotter permits me to work on one plot at a time (serial plotting) at an unbelievable pace. If assign 16 threads to the plotter, I obtain a report breaking pace of 29 minutes per plot. If I open one other occasion of the plotter and break up the threads and RAM between each cases, I’m able to have two plots each 55 minutes (a mean of 26 minutes per plot).
The right way to use the madMAx43v3r Chia Plotter:
If you’re new to plotting and never reploting for swimming pools then utilizing madMax software program is greater than sufficient, verify the tutorial beneath. For re-ploting skip this part.
Word: to copy my outcomes, it’s important to use two high-speed SSD drives with MLC NAND. This information received’t provide the marketed outcomes if in case you have a bottleneck in your plotting rig.
Obtain the plotter from right here and unzip it in your desktop.
Proper click on on “plot_with_log.cmd” (is good to have logs) and edit it.
Right here is how my present instructions appears like and i’ll clarify every of them:
@ECHO OFFSET hr=%time:~0,2percentIF “%hr:~0,1%” equ ” ” set hr=0percenthr:~1,1percentSET DATETIME=Log_percentdate:~-4,4%%date:~-10,2%%date:~-7,2percent_percenthr%%time:~3,2%%time:~6,2percentSET LOG_FILE=logs/%DATETIME%.logIF NOT EXIST logs MKDIR logspowershell “.chia_plot.exe -t E: -2 G: -d D:CHIA -r 16 -u 512 -v 128 -n 1 -c poolkey -f farmerkey | tee ‘%LOG_FILE%'”PAUSE
From all that code we are going to concentrate on this line solely: powershell “.chia_plot.exe -t E: -2 G: -d D:CHIA -r 16 -u 512 -v 128 -n 27 -c poolkey -f farmerkey | tee ‘%LOG_FILE%'”
“-t E:” is my first nvme ssd for non permanent plotting which is WD_Black SN750 1TB (-t, –tmpdir arg Non permanent listing, wants ~220 GiB (default = $PWD)) <tmpdir> wants about 220 GiB house, it’s going to deal with about 25% of all writes. (Examples: ‘./’, ‘/mnt/tmp/’)
“-2 G:” is my second nvme ssd for non permanent plotting which is WD_Black SN750 1TB (-2, –tmpdir2 arg Non permanent listing 2, wants ~110 GiB [RAM] (default = <tmpdir>)) <tmpdir2> wants about 110 GiB house and ideally is a RAM drive, it’s going to deal with about 75% of all writes. Mixed (tmpdir + tmpdir2) peak disk utilization is lower than 256 GiB. I assigned every of my plotting SSD’s to every non permanent listing: “-t E: -2 G:”. Which means my quickest and most sturdy SSD is -tmpdir2, and it handles 75% of the writing. The second, cheaper SSD is assigned to –tempdir, and it’s principally there to forestall write pace bottlenecks.
“-d D:CHIA” i’ve the present lively farming HDD like Seagate Exos or Western Digital underneath –finaldir. That’s the place the finished plots are being saved to (-d, –finaldir arg Ultimate listing (default = <tmpdir>))
“-r 16” I assign as much as 16 threads per plot, cpu which is a Ryzen 9 3950x. Do discover that –r merely limits the utmost quantity of threads that can be utilized per plot. It doesn’t lock these threads to that job alone. Any –r worth greater than 16 proved to not change something. At the least on my rigs. (-r, –threads arg Variety of threads (default = 4))
“-u 512” pahse one buckets (P1) 512 (-u, –buckets arg Variety of buckets (default = 256))
“-v 128” part tree + 4 128 (P3+P4) (-v, –buckets3 arg Variety of buckets for part 3+4 (default = buckets)) this plotter lets you enhance the bucket quantity previous 128. I set mine to “-u 512 -v 128”. Mixed with –r 16, this improved efficiency significantly.
“-n 27” what number of plots to create with the present run, in my case 27 plots to be created for a 3TB HDD (-n, –rely arg Variety of plots to create (default = 1, -1 = infinite))
“-c POOLKEY” right here might be added your key for swimming pools. Right here is how yo get the pool key: Run PowerShell and write “chia plotnft present” then search for “P2 singleton deal with (pool contract deal with for plotting)” and duplicate it.
“-f FARMERKEY” Right here is get the farmer key: In the identical PowerShell terminal write “chia keys present” and duplicate the important thing the place it says “Farmer public key“.
We’re prepared to start out creating the primary plots, run “plot_with_log.cmd” and it’ll start the plotting creation course of
have enjoyable! 🙂
My outcomes with 16 threads:
Whole plot creation time was 1699.33 sec (28.3221 min)
Plotting with two madMax cases
As I discussed earlier, you’ll be able to run two cases of this plotter in parallel with diminishing returns. On a rig with 32 CPU threads and 32GB RAM, the plot creation time goes from 28 minutes to 55 minutes per occasion, per plot. Which means every plot takes a mean of 25 minutes to create.
Plot 1: 3095.17 sec (51.5862 min)
Plot 2: 3114.45 sec (51.9075 min)
complete time per plot: 25.8734 min
The right way to rePlot for Swimming pools w/ PSChiaPlotter & MadMax
Now that official swimming pools are dwell, we now have to replot once more for transportable plots (also referred to as pool plots). If you have already got fairly a number of plots being farmed on, re-plotting might be successful to your efficiency till all of them are transformed.There’s a approach to mitigate that, although. In the event you use the PSChiaPlotter along side the madMAx43v3r plotter, you’ll be able to re-plot nearly seamlessly.Enormous shootout to NotAnotherTech Channel for making this attainable.
With this duo, you’ll be able to nonetheless solo farm with all your outdated plots, even these which can be about to get deleted.All it’s important to do is configure the Replot perform within the PSChiaPlotter to make use of the madMax plotter.In any other case, you would need to delete a number of plots to make room for the brand new ones, which means that you just’d have fewer plots farming through the re-plotting course of.Or, if you happen to use the PSChiaPlotter alone, you’d lose on the additional pace madMAx43v3r can present.
There isn’t any want for me to make a step-by-step tutorial for this as a result of NotAnotherTech Channel did it completely and that i had nothing else so as to add, anyway if in case you have questions let me know. Right here is how you must do it:
Disclaimer: This isn’t monetary advise, I’m not a monetary advisor, that is for academic functions solely. If you wish to put money into cryptocurrency please do your personal analysis and make investments at your personal danger, 1stMiningRig is rarely responsible for any selections you make. 1stMiningRig could obtain donations or sponsorships in affiliation with sure content material creation. 1stMiningRig could obtain compensation when affiliate/referral hyperlinks are used.
Thanks for studying. As at all times, your feedback, solutions and questions are welcome.
Subscribe and keep tuned for additional updates!
